ATRON® SP200

Factory environment solution

ATRON® SP 200 is an aqueous-alkaline surfactant cleaner, specifically developed to remove baked-on fluxes from solder pallets and condensation traps.

ATRON® SP 200 can also be used for the removal of unsoldered solder pastes from SMT stencils. The cleaner is suitable for air assisted, ultrasonic and spray-in-air cleaning equipment.

Inquiries about products

Download Catalog

Areas of application – Condensation traps / Solder frame / Stencil Cleaning
Advantages compared to other cleaners
Simple, easy-to-use handling.
3 to 10 times longer bath life than traditional surfactant cleaners. The reduced number of bath changes results in a lower volume of cleaning agent disposal. Thereby, process costs are reduced. This was proven by several customer cases.
Excellent compatibility with aluminum and epoxy surfaces.
No build-up of organics in the rinsing section.
Approved by leading international cleaning equipment and stencil manufacturers.
ATRON® SP 200 is also suitable for cleaning conveyor fingers or the manual removal of extremely baked-on flux residues in solder ovens and similar applications.

Process Steps

Cleaning Process	1. Cleaning	2. Rinsing	3. Drying
Air assisted cleaning	ATRON® SP 200	Recommended: DI-water or tap water	Hot or circulating air
Ultrasonic	ATRON® SP 200	Recommended: DI-water or tap water	Hot or circulating air
Spray-in-air	ATRON® SP 200	DI-water or tap water	Hot or circulating air

Independent Test Center - Largest choice of leading machines, chemistry & analytics

Machine Test Center

Analytical Center

Technical Data*

Density	(g/ccm) at 20°C/68°F	1.00
Surface tension	(mN/m) at 25°C/77°F	n.a.
Boiling point	°C/°F	100°C / 212°F
Flash point	°C/°F	None until boiling
pH value	10g/l H2O	12.0
Vapor pressure	(mbar) at 20°C/68°F	Approx. 23
Cleaning temperature	°C/°F	20-50°C / 68-122°F
Solubility in water	-	Soluble
Application concentration	Concentrate	10 - 25 %
HMIS Rating	Health-Flammability-Reactivity	0 - 0 - 0

* Please note that the information above represents ATRON® SP 200 at 15 % concentration.

Product Features & Cleaning Standards

100% compliance with EU guidelines (RoHS 1, 2 & 3, WEEE)

Extensively tested and suitable for cleaning lead-free solder pastes

Product is free of any critical substances according to SIN & SVHC lists

Environmental, health & safety regulations

ATRON® SP 200 is water-based and biodegradable.
ATRON® SP 200 is formulated free of any halogenated compounds and therefore environmentally friendly.
Refer to the SDS for specific handling precautions and instructions.
This product is non-hazardous material.